PEAK Fly Tying Vises
PEAK Rotary Vise w/Pedestal Base (PRV-G2)
The PEAK Rotary Vise (PRV products) is designed
for optimal tying efficiency and ease of adjustment
and set-up. Materials (including Stainless Steel,
Brass, Tool Steel, and Aircraft Aluminum) are
chosen to last a lifetime. Hardened and tempered
tool steel jaws hold hooks securely, from size 2/0
(depending on exact hook wire diameter) down to
the smallest you can buy. Adjustments are
accomplished with minimal effort. The large stable
pedestal base will hold this vise where you set it,
and the non-marking feet protect the surface you
set it on. The steel base is powder coated white for a
durable surface that provides a backdrop you can
see your materials against. The base also includes
an integrated hook/bead pocket with rounded edges
for ease of removal, and two accessory post
mounting holes
(accessory post not included). The
base is designed to pack flat for travel with the vise
removed. The rotation resistance adjustment screw
provides infinite adjustment and is easily
manipulated by right or left handed tiers. A height
and length adjustable bobbin cradle are supplied
with the vise. Loosening a single set screw allows the
vise to be removed from the base for travel.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
Our other option for the PEAK Rotary Vise, our
remarkable C-Clamp mount (PRVC-1). As with the
Pedestal Base configuration (PRV-G2), PEAK's
C-Clamp Mount option (PRVC-1) is engineered to
outperform the competition. Reverse the lower
rabbeted jaw to get a grip range from 2-1/4" to
11/16". Jaws ride on precision guide rods holding
the jaw faces parallel, there is no rotating clamp
screw bearing against your table to damage the
finish. Clamping is accomplished with a large
comfortable tri-lobal clamp screw.  The deep rabbet
engages rounded table edges so your vise won't
rock. You won't find a more stable, versatile, robust
clamp and it's the only clamp that will accept our
accessory post. As one review stated "you could
press wheel bearings with this clamp."

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK non-Rotary Vise (PNRV)
After fielding many requests for an inexpensive yet
durable and functional non-rotary vise, Peak has
taken the design principles that have served us so
well with our Rotary Vise and applied them to this
new and exciting tool.  The PEAK non-Rotary Vise
uses the same clamping system as the tried and true
PEAK Rotary Vise.  The base is slightly smaller and
lighter in weight than the Rotary Vise, making this
an item to seriously consider if you need a lighter
weight travel vise.  The base has the durable white
powder coat finish that we're known for and it still
disassembles and packs flat for ease of transport.  
The base also includes an additional hole for our
accessory shaft
(not included) and all PEAK
accessories except our Material Clip will work with
the non-Rotary Vise.  As with the Rotary Vise,
optional midge and saltwater jaws are available for
the PEAK non-Rotary Vise
(jaws for the Rotary Vise
and non-Rotary Vise are not interchangeable)
. The
PEAK non-rotary vise (PNRV) will fit our C-Clamp
option (CMP-1) but is only sold wth the pedestal
base shown.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK Fishing
599 West 71st Street
Loveland, CO  80538
970-622-9601 (ph)
970-622-9602 (fax)

info@peakfishing.com

last updated 03/03/2017
Built with the same quality materials used in PEAK’s
original Rotary Vise. PEAK’s Rotary Tube Fly Vise
uses a chuck with no collets that require changeout,
maximizing convenience and minimizing set-up time.
The chuck will accept pins and metal tubes up to 1/8”
in diameter. PEAK's custom ground pins have a
shallow sloped shoulder for capturing the tubing. No
additional pieces are needed, simply push the tubing
up the shoulder until it is held snugly. The vise
comes with two pins, 1/32” and 1/16”, other sizes are
available separately. Available with PEAK’s Pedestal
Base (PTFV-G2) or our C-Clamp (PTFV-C1, shown
below), either option provides the most stable
mounting platform available and makes this vise
compatible with PEAK’s other unique accessories.
Comes with PEAK's bobbin cradle assembly for full
rotary tying capability.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK Tube Fly Vise w/Pedestal Base (PTFV-G2)
Property of PEAK Engineering and Automation DBA PEAK Fishing Copyright 2009 - 2017 All Rights Reserved
PEAK Rotary Vise w/C-Clamp (PRVC-1)
Use with PEAK's
custom ground tapered
pins or mount metal
tubes up to 1/8"
diameter directly in
chuck
Use with PEAK's
custom ground tapered
pins or mount metal
tubes up to 1/8"
diameter directly in
chuck
PEAK Tube Fly Vise w/C-Clamp (PTFV-C1)
Built with the same quality materials used in PEAK’s
original Rotary Vise. PEAK’s Rotary Tube Fly Vise
uses a chuck with no collets that require changeout,
maximizing convenience and minimizing set-up time.
The chuck will accept pins and metal tubes up to 1/8”
in diameter. PEAK's custom ground pins have a
shallow sloped shoulder for capturing the tubing. No
additional pieces are needed, simply push the tubing
up the shoulder until it is held snugly. The vise
comes with two pins, 1/32” and 1/16”, other sizes are
available separately. Available with PEAK’s C-Clamp
(PTFV-C1) or our Pedestal Base (PTFV-G2, shown
above), either option provides the most stable
mounting platform available and makes this vise
compatible with PEAK’s other unique accessories.
Comes with PEAK's bobbin cradle assembly for full
rotary tying capability.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*